Título: Soft MatterImportada do Authenticus Pesquisar Publicações da Revista

Vol. 8 Nº 24

Páginas: 536-555

ISSN: 1744-683X

Editora: Royal Society of Chemistry

ISI Web of Knowledge - 58 Citações

ISI Web of Science

Scopus - 72 Citações

FOS: Ciências da engenharia e tecnologias > Engenharia dos materiais

ID Authenticus: P-002-GV4

DOI: 10.1039/c1sm06494k

Abstract (EN): Wormlike micellar surfactant solutions are encountered in a wide variety of important applications, including enhanced oil recovery and ink-jet printing, in which the fluids are subjected to high extensional strain rates. In this contribution we present an experimental investigation of the flow of a model wormlike micellar solution (cetyl pyridinium chloride and sodium salicylate in deionised water) in a well-defined stagnation point extensional flow field generated within a microfluidic cross-slot device. We use micro-particle image velocimetry (mu-PIV) and full-field birefringence microscopy coupled with macroscopic measurements of the bulk pressure drop to make a quantitative characterization of the fluid's rheological response over a wide range of deformation rates. The flow field in the micromachined cross-slot is first characterized for viscous flow of a Newtonian fluid, and mu-PIV measurements show the flow field remains symmetric and stable up to moderately high Reynolds number, Re approximate to 20, and nominal strain rate, (epsilon)over dot(nom) approximate to 635 s(-1). By contrast, in the viscoelastic micellar solution the flow field remains symmetric only for low values of the strain rate such that (epsilon)over dot(nom) <= lambda(-1)(M), where lambda(M) = 2.5 s is the Maxwell relaxation time of the fluid. In this stable flow regime the fluid displays a localized and elongated birefringent strand extending along the outflow streamline from the stagnation point, and estimates of the apparent extensional viscosity can be obtained using the stress-optical rule and from the total pressure drop measured across the cross-slot channel. For moderate deformation rates ((epsilon)over dot(nom) >= lambda(-1)(M)) the flow remains steady, but becomes increasingly asymmetric with increasing flow rate, eventually achieving a steady state of complete anti-symmetry characterized by a dividing streamline and birefringent strand connecting diagonally opposite corners of the cross-slot. Eventually, as the nominal imposed deformation rate is increased further, the asymmetric divided flow becomes time dependent. These purely elastic instabilities are reminiscent of those observed in crossslot flows of polymer solutions, but seem to be strongly influenced by the effects of shear localization of the micellar fluid within the microchannels and around the re-entrant corners of the cross-slot.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 20