Re-Admission - 2022/2023

• Programmes/Cycle of Studies
• Applicants
• Numerus Clausus
• Applications
• Deadlines
• Ranking Criteria
• Documents Required
• Fees
• Procedures
• Legislation

There is no definition of competitions open for this type of admission scheme.

Applicants

The Readmission regime is intended for students who, having had an interruption in their studies, intend to enrol in the same higher education institution and study cycle in which they were previously enrolled, or in a study cycle that has succeeded it.

Preliminary notes:
- Bachelor students who registered in the academic year 2021/2022 and who have requested the cancellation of their enrolment may not apply for readmission in academic year 2022/2023.
- Students who have registered in the academic year 2021/2022 and who have requested the cancellation of the registration/withdrawal from the cycle of studies do not need to apply for readmission in the academic year 2022/2023. They can simply renew the registration for 2022/2023 within the deadline set for that purpose.
- In accordance with Article 2nd of the Regulation on periods of limitation for cycles of studies at the University of Porto, students who have been time-barred for the 2^nd time in their cycle of studies cannot apply for readmission (see information about periods of limitation).


Application by Integrated Master's students or students from preceding courses
Following the provisions of Decree-Law No. 65/2018, of August 16th, from the academic year 2021/2022 onwards the Faculty of Engineering of the University of Porto no longer has admissions/readmissions for Integrated Masters and the adaptation of these cycles of studies resulted in the creation of new Bachelors (1^st cycle studies) and new Masters (2ns cycle studies).
Consequently, students from Integrated Masters or predecessor courses who have interrupted their studies and wish to resume them must apply for Readmission in only one of the new cycles of studies (Bachelor OR Master) in accordance with the following general guidelines:

• If students have completed all the curricular units of the first three years of their study plan (i.e., have completed the Licenciatura/Bachelor in Engineering Sciences), they must apply for Readmission in the new Master that succeed the Integrated Master or predecessor course they had previously attended;
• If students have not completed the first three years of their study plan, they must apply for Readmission in the new Bachelor that resulted from the adaptation of the Integrated Master or predecessor course they had previously attended. In this case, depending on the number of ECTS credits students have to complete in order to finish the Bachelor, they will be positioned in the Bachelor only (if they have 75 or more ECTS credits pending approval) or both in the Bachelor and in the Master (if they have less than 75 ECTS credits pending approval in the Bachelor), therefore taking advantage of the transition plan that results from the adaptation of Integrated Masters.

Tuition fees:
Tuition fee information for 2022/2023 will be soon available.

Numerus Clausus

Programmes/Cycle of Studies	Phase	Numerus Clausus	Curricular year
Bachelor in Bioengineering	1
	2
	3
Bachelor in Chemical Engineering	1
	2
	3
Bachelor in Civil Engineering	1
	2
	3
Bachelor in Electrical and Computer Engineering	1
	2
	3
Bachelor in Environmental Engineering	1
	2
	3
Bachelor in Industrial Engineering and Management	1
	2
	3
Bachelor in Informatics and Computing Engineering	1
	2
	3
Bachelor in Materials Engineering	1
	2
	3
Bachelor in Mechanical Engineering	1
	2
	3
Bachelor in Mining and Geo-Environmental Engineering	1
	2
	3
Doctoral Program in Advanced Materials and Processing	1
	2
	3
	4
	5
Doctoral Program in Biomedical Engineering	1
	2
	3
	4
	5
Doctoral Program in Chemical and Biological Engineering	1
	2
	3
	4
	5
Doctoral Program in Civil Engineering	1
	2
	3
	4
	5
Doctoral Program in Digital Media	1
	2
	3
	4
	5
Doctoral Program in Electrical and Computer Engineering	1
	2
	3
	4
	5
Doctoral Program in Engineering and Industrial Management	1
	2
	3
	4
	5
Doctoral Program in Engineering and Public Policy	1
	2
	3
	4
	5
Doctoral Program in Engineering Physics	1
	2
	3
	4
	5
Doctoral Program in Environmental Engineering	1
	2
	3
	4
	5
Doctoral Program in Informatics Engineering	1
	2
	3
	4
	5
Doctoral Program in Leaders for Technological Industries	1
	2
	3
	4
	5
Doctoral Program in Mechanical Engineering	1
	2
	3
	4
	5
Doctoral Program in Metallurgical and Materials Engineering	1
	2
	3
	4
	5
Doctoral Program in Mining and Geo-Resources Engineering	1
	2
	3
	4
	5
Doctoral Program in Occupational Safety and Health	1
	2
	3
	4
	5
Doctoral Program in Refining, Petrochemical and Chemical Engineering	1
	2
	3
	4
	5
Doctoral Program in Spatial Planning	1
	2
	3
	4
	5
Doctoral Program in Sustainable Energy Systems	1
	2
	3
	4
	5
Doctoral Program in Transport Systems	1
	2
	3
	4
	5
Master in Bioengineering	1
	2
	3
	4
Master in Biomedical Engineering	1
	2
	3
	4
Master in Chemical Engineering	1
	2
	3
	4
Master in Civil Engineering	1
	2
	3
	4
Master in Civil Engineering Structures	1
	2
	3
	4
Master in Computational Mechanics	1
	2
	3
	4
Master in Computer Vision	1
	2
	3
	4
Master in Data Science and Engineering	1
	2
	3
	4
Master in Electrical and Computer Engineering	1
	2
	3
	4
Master in Environmental Engineering	1
	2
	3
	4
Master in Industrial Engineering and Management	1
	2
	3
	4
Master in Informatics and Computing Engineering	1
	2
	3
	4
Master in Information Science	1
	2
	3
	4
Master in Innovation and Technological Entrepreneurship	1
	2
	3
	4
Master in Integrated Building Design and Construction	1
	2
	3
	4
Master in Materials Engineering	1
	2
	3
	4
Master in Mechanical Engineering	1
	2
	3
	4
Master in Mining and Geo-Environmental Engineering	1
	2
	3
	4
Master in Multimedia	1
	2
	3
	4
Master in Occupational Safety and Hygiene Engineering	1
	2
	3
	4
Master in Services Engineering and Management	1
	2
	3
	4
Master in Software Engineering	1
	2
	3
	4
Master in Soil Mechanics and Geotechnical Engineering	1
Master in Spatial Planning and Urban Project	1
	2
	3
	4

Readmission is not subject to quantitative limitations on vacancies.

Applications

Deadlines

Deadlines for Application - Bachelors

	1st Phase	2nd Phase	3rd Phase
Submission of applications	From 17th January to 27th April 2022	From 28th April to 08th August 2022	From 22nd August to 21st September 2022
Posting of provisional results	17th May 2022	N/A	N/A
Prior hearing	From 18th to 31st May 2022	N/A	N/A
Posting of final results	07th June 2022	05th September 2022	04th October 2022
Submission of complaints	From 08th  June to 01st July 2022	From 06th a 26th September 2022	From 06th a 26th October 2022
Publication of decision about complaints	08th July 2022	04th October 2022	02nd November 2022
Online enrolment	From 13th to 22nd June 2022	From 07th to 19th September 2022	From 07th to 17th October 2022
Request of credit transfer regarding prior training / work experience	Until 22nd June 2022	Until 19th September 2022	Until 17th October 2022
Publication of credit transfer results	Until 14th July 2022	Until 11th October 2022	Until 8th November 2022
Change of the registration in result of the credit transfer process	Up to 10 working days after the publication of the credit transfer results	Up to 10 working days after the publication of the credit transfer results	Up to 10 working days after the publication of the credit transfer results

Deadlines for Application - 2nd and 3rd Cycles of Study

	1st Phase	2nd Phase	3rd Phase	4th Phase	5th Phase*
Submission of applications	From 24th January to 05th March 2022	From 07th March to 23rd May 2022	From 24th May to 08th August 2022	From 22nd August to 21st September 2022	From 27th October to 23rd November 2022
Posting of provisional results	25th March 2022	14th June 2022	N/A	N/A	15th December 2022
Prior hearing	From 28th March to 09th April 2022	From 15th to 30th June 2022	N/A	N/A	From 16th December 2022 to 05th January 2023
Posting of final results	16th April 2022	08th July 2022	05th September 2022	04th October 2022	12th January 2023
Submission of complaints	From 19th April to 10th May 2022	From 11th to 29th July 2022	From 06th a 26th September 2022	From 06th a 26th October 2022	From 13th January to 02nd February 2023
Publication of decision about complaints	17th May 2022	09th August 2022	04th October 2022	02nd November 2022	09th February 2023
Online enrolment	From 21st April to 03rd May 2022	From 13th to 22nd July 2022	From 07th to 19th September 2022	From 07th to 17th October 2022	From 19th to 30th January 2023
Request of credit transfer regarding prior training / work experience	Until 3rd May 2022	Until 22nd July 2022	Until 19th September 2022	Until 17th October 2022	Until 30th January 2023
Publication of credit transfer results	Until 24th May 2022	Until 12th August 2022	Until 11th October 2022	Until 8th November 2022	Until 20th February 2023
Change of the registration in result of the credit transfer process	Up to 10 working days after the publication of the credit transfer results	Up to 10 working days after the publication of the credit transfer results	Up to 10 working days after the publication of the credit transfer results	Up to 10 working days after the publication of the credit transfer results	Up to 10 working days after the publication of the credit transfer results

Ranking Criteria

Since the Readmission regime is not subject to quantitative limitations of places available, no ranking criteria apply.

Documents Required

• ID document (Citizen Card /ID Card / Passport) or declaration containing the identification data (mandatory);
• Certificate (Transcript) of the curricular units completed (to be presented by applicants whose information is not available in FEUP's Information System FEUP (optional);
• Photo (optional).

 

Fees

Application is subject to the payment of a non-refundable fee of 55 euros.

Procedure to generate ATM references:
1. Click on the button  next to the application fee.
2. Confirm the data displayed and click "Atribuir" (Assign) and the associated reference will be automatically generated.
3. Click "Voltar à conta corrente" (Back to current account) to see the reference generated.

Payments from abroad may be made by bank transfer, at payer’s expenses, using the information in the attached document.
Then, you must send proof of the bank transfer to acesso.ingresso@fe.up.pt and e tesouraria@fe.up.pt, with the following data:
- Name of the payer and the name of the applicant, address, country, tax identification number and the purpose of the payment (application).

Note:
- After the deadline for submitting applications, applicants have 2 additional days to ensure the payment of the corresponding fee, which is required for the application to become effective. After this deadline, any applications regarding which fees have not been paid will be rejected outright.

Procedures

Procedure for submission of application

1. Choose the intended cycle of studies/course and access regime (Applications).
2. Select "Apresentar candidatura" (Submit application). If you are already a student at FEUP, you will have to log in using your student’s username and password. If you are not a student at FEUP, you will be asked to complete a user registration form. The credentials (username and password) will be sent to the email address you specify on that form. For technical reasons, it is not advisable to use Hotmail or Yahoo e-mail addresses.
3. Fill in the application form and attach the requested documents. Please note that fields in red are mandatory.
4. Submit your application. If an error is detected (e.g. mandatory fields left blank), the system displays an alert message.
   If the information is successfully submitted, you must check all data entered and either confirm or edit the data.
5. After confirmation of your application submission you will see information regarding the payment of the corresponding fee with ATM references. For payments made from abroad, please check the information available in the Fees section (see above).
6. If you have encountered any problems while submitting your application, you must report them to acesso.ingresso@fe.up.pt during the application submission period or on the working day following the deadline for submission.

Procedure for checking the status of your application

1. Log into the information system with the username and password that you used in your application;
2. Click on your name;
3. Select the academic year of the application(s) you submitted;
4. In the options that appear on the right hand side of the page, select "Candidaturas de Ingresso" (Applications).

Procedure to request credit transfer/recognition

1. Credit transfer/recognition request (optional) is subject to the non-refundable payment of the fees set-out in the Table of fees of the University of Porto.
2. If you wish to create a credit transfer request, in the field "You want to make a request for recognition" of the application form, select "Yes".
3. In the options on the right hand side of the page, under "Reconhecimentos" (Credit transfer), select "Criar/Editar" (Create/Edit) and enter the request.
4. After creating the credit transfer/recognition request, you must complete and submit the application.

Procedure for enrolment
This procedure will be made available through a link on FEUP's homepage at the beginning of the registration period.
The enrolment in Doctoral Programmes is subject to the payment of a registration fee, as indicated in the Table of fees of the University of Porto.

Applicable Legislation

Note: The following applicable legislation is only available in Portuguese.

Ministerial Order No. 181-D/2015, of 19^th June – Approves the Regulation concerning the readmission regime and the change of institution/course pairing regime in higher education.

Regulation No. 749/2019, of 27th September - Amendment to the General Regulation for the Readmission and Change of Institution/Course Pairing Regimes of the University of Porto